West Valley City Foundation Pros logoWest Valley City Foundation ProsFoundation Repair · West Valley City, UT
Foundation Crack Repair photo

West Valley City Foundation Pros

Foundation Crack Repair in West Valley City, UT

Foundation crack repair in West Valley City with epoxy and polyurethane injection, free estimates, and honest hairline-vs-structural diagnosis.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving West Valley City and nearby communities.

Not every crack in a basement wall means the house is failing, but telling the difference between a shrinkage crack and an active settlement crack takes a trained eye, not a tube of caulk. West Valley City Foundation Pros inspects the crack's width, direction, and whether it's still moving before recommending epoxy injection, polyurethane foam, or a different fix entirely.

Homes built through West Valley City's 1980 incorporation era have had decades of freeze-thaw cycling to work cracks open each winter and close them again by summer. That repeated movement is why a crack that looked fine last year can widen or run diagonally this spring, and why a proper structural repair bonds the crack rather than just covering it.

What's included

What's included

  • Typically included — crack inspection and classification, surface cleaning, injection port setup, epoxy or polyurethane injection, surface finishing.
  • Optional — exterior waterproof coating over the repaired area, monitoring visit the following season to confirm the crack stayed sealed.
  • Customer prep — clear furniture or storage away from the affected wall and note when the crack first appeared.

How it works

How our Foundation Crack Repair process works

  1. Crack Inspection photo
    Step 1

    Crack Inspection

    Each crack is measured for width and checked for active movement.

  2. Surface Cleaning photo
    Step 2

    Surface Cleaning

    Debris and loose material are removed from the crack area.

  3. Injection Port Setup photo
    Step 3

    Injection Port Setup

    Ports are installed along the crack to allow material injection.

  4. Sealant Injection photo
    Step 4

    Sealant Injection

    Epoxy or polyurethane is injected to fill and bond the crack.

  5. Surface Finishing photo
    Step 5

    Surface Finishing

    Excess material is removed and the surface is smoothed flush.

  6. Final Inspection photo
    Step 6

    Final Inspection

    The repair is checked to confirm a watertight, stable seal.

Materials

Materials and methods for Foundation Crack Repair

West Valley City's clay-heavy soil swells and shrinks with the seasons, so the sealant has to flex with the wall, not just plug the gap.

  • Epoxy Injection Resin photo

    Epoxy Injection Resin

    Bonds structural cracks back together so the wall carries load the way it was built to, the right call when a crack is stable but was caused by settlement.

  • Polyurethane Foam Sealant photo

    Polyurethane Foam Sealant

    Expands into the crack and blocks water, the better option when snowmelt is actively seeping through.

  • Injection Ports photo

    Injection Ports

    Spaced along the crack so sealant reaches the full depth instead of just the visible surface.

  • Surface Primer photo

    Surface Primer

    Preps the concrete so the sealant actually bonds instead of peeling off within a season.

  • Masonry Patch Compound photo

    Masonry Patch Compound

    Blends the repaired section into the surrounding wall finish.

  • Protective Topcoat photo

    Protective Topcoat

    Shields the repair from the next spring's moisture before it has a chance to find a new path.

Timeline

How long does a Foundation Crack Repair take?

Most crack repairs are a single visit from start to finish.

  1. 01

    Inspection and diagnosis

    same day
  2. 02

    Surface prep and port setup

    1–2 hours
  3. 03

    Injection and cure

    same day

    foam sets within hours

  4. 04

    Final check

    same visit

Need a schedule that fits?

Get a Free Estimate

Before & after

Before and after Foundation Crack Repair results

  • Foundation Crack Repair photo
    Before
  • Foundation Crack Repair photo
    After

FAQs

Foundation Crack Repair FAQs

How much does foundation crack repair cost in West Valley City?

Most single-crack injection jobs run $400-$1,200 depending on crack length and whether it's epoxy or polyurethane. Longer or multiple cracks on the same wall cost more. A free estimate gives you an exact number.

How long does foundation crack repair take?

A typical injection repair is done in a single visit, usually a few hours including cleanup and surface finishing.

Do I need a permit for foundation crack repair?

Crack injection is a cosmetic and structural seal, not new construction, so it usually doesn't require a permit in West Valley City. Verify with the city if the crack is tied to larger structural work.

Is DIY foundation crack repair a good idea?

Caulking a hairline, non-moving crack yourself is fine as a stopgap. An active or widening crack needs injection that reaches the full depth, which store-bought caulk can't do.

How do I know if I need crack repair or a bigger fix like piering?

If the crack is stable and under about 1/8 inch, injection usually solves it. If the wall is also bowing, the floor above is uneven, or doors are sticking, the cause is likely foundation movement that needs piering first.

Next step

Get a Foundation Crack Repair estimate in West Valley City

Call (435) 295-5940 for a free, no-pressure look at your crack and a straight answer on whether injection is enough.

Ask about Foundation Crack Repair

Tell us about the project and how to reach you.

Call (435) 295-5940