West Valley City Foundation Pros logoWest Valley City Foundation ProsFoundation Repair · West Valley City, UT
Concrete Lifting photo

West Valley City Foundation Pros

Concrete Lifting in West Valley City, UT

Polyurethane concrete lifting for sunken slabs in West Valley City, UT. Polyjacking, dime-sized drill holes, free estimates.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving West Valley City and nearby communities.

Concrete lifting raises a sunken slab back to level by pumping hydrophobic polyurethane foam underneath it through dime-sized drill holes, instead of tearing the slab out and pouring new concrete. West Valley City Foundation Pros uses this method on driveways, patios, sidewalks, and garage floors that have settled unevenly over soil that's been compacting and shifting for decades.

Most slabs here sink because the soil under them lost volume, either from water washing out fines or from freeze-thaw cycling that's been working on West Valley City's older concrete for years. Foam lifting fills that void and supports the slab without the mess, cost, or downtime of a full replacement pour.

What's included

What's included with Concrete Lifting

Typically included: site assessment, drilling access holes, foam injection to target depth, elevation checks during the lift, hole patching, and a final walk-through.

Optional: joint resealing, surface sealant application, add-on leveling for a second adjacent slab.

Customer prep: clear vehicles and furniture off the work area and keep pets away from the slab for the day.

How it works

How our Concrete Lifting process works

  1. Surface Assessment photo
    Step 1

    Surface Assessment

    Uneven or sunken concrete areas are identified and measured.

  2. Drilling Access Holes photo
    Step 2

    Drilling Access Holes

    Small holes are drilled into the concrete to allow material injection.

  3. Material Injection photo
    Step 3

    Material Injection

    Expanding foam is injected beneath the slab to raise it evenly.

  4. Elevation Monitoring photo
    Step 4

    Elevation Monitoring

    Lift progress is measured to achieve the desired level.

  5. Hole Patching photo
    Step 5

    Hole Patching

    Access holes are filled and finished to match the surrounding surface.

  6. Final Inspection photo
    Step 6

    Final Inspection

    The lifted area is reviewed for levelness and stability.

Materials

Materials and methods for Concrete Lifting

West Valley City's mix of clay and sandy soil settles unevenly under slabs, so the lifting material has to fill voids without adding weight that the soil can't support.

  • Polyurethane Foam photo

    Polyurethane Foam

    Expands beneath slabs to lift and stabilize concrete surfaces, well suited to the lighter load limits of settled soil around older West Valley City homes.

  • Injection Ports photo

    Injection Ports

    Allow controlled placement of lifting material under the slab so the lift happens in even stages, not one risky push.

  • Patch Compound photo

    Patch Compound

    Fills drilled access holes for a smooth finish that blends with the rest of the driveway or walkway.

  • Surface Sealant photo

    Surface Sealant

    Protects the repaired area from moisture and staining, important given the valley's spring runoff.

  • Leveling Gauge photo

    Leveling Gauge

    Used to measure and confirm slab elevation during lifting, keeping the surface flat rather than guessing by eye.

  • Bonding Agent photo

    Bonding Agent

    Improves adhesion between new patch material and existing concrete for a durable, long-lasting repair.

Timeline

How long does a Concrete Lifting take?

Most jobs are done in a single visit, start to finish, with the slab ready for light use shortly after.

  1. 01

    Consult and assessment

    same day
  2. 02

    Drilling and injection

    2–4 hours
  3. 03

    Hole patching

    same visit

  4. 04

    Full cure before vehicle load

    24 hours

Need a schedule that fits?

Get a Free Estimate

Codes & permits

Permits and codes for Concrete Lifting

Always confirm with West Valley City or Salt Lake County before work begins, especially on public right-of-way sidewalks.

Typically needs a permitOften no permit
None typically for standard residential slab liftingDriveway slab lifting
—Patio slab lifting
—Sidewalk slab lifting
—Garage floor leveling

Cost

What does a Concrete Lifting cost in West Valley City?

Cost depends on slab size, how big the void underneath is, and how many injection points it takes to get an even lift. Call for a free estimate to get an exact number for your slab.

Project typeTypical rangeWhat’s included
Small slab repair$400–$900,single garage apron or small walkway section.
Standard driveway or patio$900–$2,500,multiple injection points, one full slab.
Larger multi-slab jobs$2,500–$5,000+, driveway plus patio or sidewalk combined.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate

DIY vs pro

DIY vs hiring a pro for Concrete Lifting

DIYHire a pro
Filling small surface cracks with a concrete patch productLifting a sunken slab back to level
Sealing joints with a basic caulk as a stopgapFilling the actual void underneath so the slab stays supported
Monitoring a slight slope to see if it worsens over a seasonCorrecting drainage slope on a driveway or patio

When to call

When to call for Concrete Lifting

Call West Valley City Foundation Pros for a free estimate before the settling gets worse.

  • A slab has visibly sunk compared to the surrounding grade
  • Water pools on the driveway or patio instead of draining away
  • A slab edge has created a trip hazard at a doorway or walkway
  • Cracks are widening where one slab section has dropped relative to another

FAQs

Concrete Lifting FAQs

How much does concrete lifting cost in West Valley City?

Most residential jobs run $400 to $2,500 depending on slab size and void depth, with larger multi-slab jobs costing more. A free estimate gives you an exact number.

How long does concrete lifting take?

Most single-slab jobs are finished in a few hours, with the slab ready for light foot traffic the same day and vehicle load after about 24 hours of cure time.

Do I need a permit for concrete lifting?

Standard residential driveway, patio, and sidewalk lifting usually doesn't require a permit, though public right-of-way sidewalks may need city sign-off.

Is DIY concrete lifting a good idea?

No. The foam injection equipment and pressure control needed for an even lift aren't DIY-friendly, and a bad lift can crack the slab further.

How is concrete lifting different from replacing the slab?

Lifting fills the void under an existing slab and raises it back to level, usually at a fraction of the cost and time of removing and repouring concrete.

Ask about Concrete Lifting

Tell us about the project and how to reach you.

Call (435) 295-5940